Pumps with Peripheral Impeller
PERFORMANCE RANGE
- Flow Rate up to 90 l/min (5.4 m³/h)
- Head up to 100 m
APPLICATION LIMITS
- Manometric suction lift up to 8 m
- Liquid temperature between -10°C and +90°C
- Ambient temperature up to -10°C and +40°C (45°C for PQ 60, PQ 60-Bs)
- Max. working pressure :
- 6 bar for PQ 60-65
- 10 bar for PQ 70-80-81-90-100-200-300, PQ 60Bs-65Bs-81Bs
- Continuous service S1
INSTALLATION AND USE
Suitable for use with clean water that does not contain abrasive particles and with liquids that are not chemically aggressive towards the materials from which the pump is made.
The hydraulic characteristics of these pumps, coupled with their copactness, make them suitable for use in both domestic and industrial applicatins.
The pump should be installed in an enclosed environment or sheltered from inclement weather.
OPTIONS AVAILABLE ON REQUEST
- Special mechanical seal
- EN 10088-3 – 1.4401 (AISI 316) stainless steel pump shaft
- Other voltages or 60 Hz frequency
- IP X5 class potection for PQ 70-80-90-100-200-300
TECHNICAL SPECIFICATION
