Self-Priming Pump Pedrollo JSW2 Series

Pompa pedrollo type JSW2 adalah pompa air centrifugal SEMI JET untuk air bersih, yang digunakan untuk mentransfer/menyedot air ersih yang tidak bersifat korosif, tidak mengandung lumpur atau pasir dari Sumur, bak penampung air atau kolam penampungan air.

Pompa type JSW2 mampu menyedot air dengan Head atau daya dorong yang jauh. Pompa ini cocok digunakan untuk keperluan rumah tangga maupun industri seperti untuk sirkulasi air pendingin mesin, menyalurkan air dari bak penampungan ke kran air di rumah, hotel, restoran, dll. Pompa bisa dipasangkan dengan Tanki tekan.

Penempatan pompa sebaiknya yang terhindar dari tempat yang basah ataupun panas matahari langsung.

Performance Range :

  • Flow rate up to 70 l/min (4.2 m³/h)
  • Head up to 58 m

Application Limits :

  • Manometric suction lift up to 9 m (HS)
  • Liquid temperature between  -10°C and +40°C
  • Ambient temperature between  +40°C
  • Maximum working pressure 6 bar
  • Continuous Service S1

Installatiion and Use :

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The self-priming JSW pumps are designed to pump water even in cases where air is present. Because of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure tanks, and for the irrigation of gardens and orchads, etc.

The pump should be installed in an enclosed environment or sheltered from inclement weather.

PUMP BODY Cast iron complete with threaded ports in compliance with ISO 228/1
BODY BACKPLATE Stainless steel AISI 304
IMPELLER Stainless steel AISI 304
MOTOR SHAFT Stainless steel EN 10088-3-1.4104
MECHANICAL SEAL Seal Shaft Materials
Model Diameter Stationary ring Rotational ring Elastomer
AR-14 ø 14mm Ceramic Graphite NBR
BEARINGS 6203 ZZ / 6203 ZZ
CAPACITOR Pump Capacitance
Single-phase (230 V or 240 V) (110 V)
JSWm 2C 20μF 450 VL 60 μF 300 VL
JSWm 2B 25μF 450 VL 60 μF 300 VL
JSWm 2A 25μF 450 VL 60 μF 300 VL
ELECTRIC MOTOR JSWm : Single-phase 230 V – 50 Hz with thermal overload protector incorporated into the winding
JSW : three-phase 230/400 V- 50 Hz

Dimension and Weight


Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.