Self-Priming Pump Pedrollo JCR1


Pompa pedrollo type JCR1 adalah pompa air centrifugal SEMI JET untuk air bersih, yang digunakan untuk mentransfer/meyedot air bersih yang tidak bersifat korosif, tidak mengandung lumpur atau pasir dari sumur, bak penampungan air atau kolam penampungan air.

Pompa type JCR1 mampu menyedot air dengan Head atau daya dorong yang jauh. Pompa ini cocok dugunakan untuk keperluan rumah tangga maupun industri seperti untuk sirkulasi air pendingin mesin, menyalurkan air dari bak penampungan ke kran air di rumah, hotel, restoran, dll. Pompa bisa dipasangkan dengan tanki tekan.

Penempatan pompa sebaiknya yang terhindar dari tempat yang basah ataupun panas matahari langsung.

Performance Range :

  • Flow rate up to 60 l/min (3.6 m³/h)
  • Head up to 48 m

Application Limits :

  • Manometric suction lift up to 9 m (HS)
  • Liquid temperature between  -10°C and +40°C
  • Ambient temperature between  +40°C
  • Maximum working pressure 6 bar
  • Continuous Service S1

Installation and Use

Suitable for user with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made. The self-priming JCR pumps are designed to pump water even in cases where air is present. Because of their reliability and the fact that they are easy t use, they are recommended for use in domestic applications such as the distribution of water in the irrigation of gardens and orchands, etc.

The pump should be installed in an enclosed environment or sheltered from inclement weather.

 

COMPONENT CONSTRUCTION CHARACTERISTICS
PUMP BODY Staninless steel AISI 304 complete with threaded ports in compliance with ISO 228/1
BODY BACKPLATE Stainless steel AISI 304
NOZZLE ASSEMBLY Noryl FE1520PW
IMPELLER Stainless steel AISI 304
MOTOR SHAFT Stainless steel EN 10088-3-1.4104
MECHANICAL SEAL Seal Shaft Materials
Model Diameter Stationary ring Rotational ring Elastomer
AR-12 ø 12mm Ceramic Graphite NBR
BEARINGS 6201 ZZ / 6201 ZZ
CAPACITOR Pump Capacitance
Single-phase (230 V or 240 V) (110 V)
JCRm 1C 10μF 450 VL 25 μF 250 VL
JCRm 1B 10μF 450 VL 25 μF 250 VL
JCRm 1A 14μF 450 VL 25 μF 250 VL
ELECTRIC MOTOR JCRm : Single-phase 230 V – 50 Hz with thermal overload protector incorporated into the winding
JCR : three-phase 230/400 V- 50 Hz

 

 

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.