Self Priming Pump Pedrollo CK Series

Pompa pedrollo type CK adalah pompa air centrifugal Self-Priming untuk air bersih, yang tidak bersifat korosif, tidak mengandung lumpur atau pasir.

Pompa ini cocok digunakan untuk rumah tangga seperti kebun, taman, mengisi bak olam maupun untuk industri. Instalasi yang mudah, tampilan pompa yang kompak, dan tidak memakan banyak ruangan saat pemasangan.

Pompa ini juga bisa untuk memompa cairan jenis solar, karena material pompa yang mendukung untuk jenis cairan tersebut.

Performance Range :

  • Flow rate up to 50 l/min (3 m³/h)
  • Head up to 51 m

Application Limits :

  • Manometric suction lift up to 9 m (HS)
  • Liquid temperature between  -10°C and +40°C
  • Temperature of diesel up to +50°C
  • Ambient temperature between  +40°C
  • Maximum working pressure 6 bar
  • Continuous Service S1

Installation and Use

Suitable for use with diesel, clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.

As a specific result of the pump’s operating principle they are suitable for use in all situations where a compact self-primming pump is required or where the fluid supply is limited, irregular or contains air.

The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.


PUMP BODY Cast iron complete with threaded ports in compliance with ISO 228/1
MOTOR BRACKET Aluminium with brass insert (patended), reduces the risk of impeller seizure
IMPELLER Brass, star type with open radial vanes
MOTOR SHAFT Stainless steel EN 10088-3-1.4104
MECHANICAL SEAL Seal Shaft Materials
Model Diameter Stationary ring Rotational ring Elastomer
AR-12V ø 12mm Ceramic Graphite Viton
CK 50 6201 ZZ/6201 ZZ
CK 50-BP
CK 80E 6203 ZZ/ 6203 ZZ
CK 90E
CAPACITOR Pump Capacitance
Single-phase (230 V or 240 V) (110 V)
CKm 50 12.5μF 450 VL 25μF 300 VL
CKm 50-BP
CKm 80E 16μF 450 VL 60 μF 300 VL
CKm 90E 20μF 450 VL 60 μF 300 VL
ELECTRIC MOTOR CKm : Single-phase 230 V – 50 Hz with thermal overload protector incorporated into the winding
CK : three-phase 230/400 V- 50 Hz




Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.