DESCRIPTION OF PRODUCT :
The GD Series of HCP Pumps features a lightweight and slim design. The lightweight and small pump body makes this pump easy to carry to any corner of construction ites for dewatering. The slim design of the pump body also allows the pumps to be installed in drainage pipes or pits of construction sites, narrow wells, confined spaces, or shallow waters. The cooling Jacket design provides extra water cooling to the motor, when water flows through. The impeller and the hydraulic components are mode of a special rubber that is durable and capable of handling construction site dewatering.
FEATURES :
- Water cooling motor, rubber suction pads for residual removal down to 1mm (0.39″)
- Portable and Light weight best pump for removing water from flat surfaces.
- Double seals (silicon carbide), epoxy resin cable, IP68, an Auto-Cut motor protector, rubberized hydraulic components against any tough applications.
- Standard discharge : Outlet discharge 1″ LOT 1-74 (Optional 2″ LOT 2-74)
APPLICATIONS
- Basement/Pool/Pond water removal
- Residential, Commercial residue dewatering
SPECIFICATION PERFORMANCE
Model : GDR-400
Output HP (kW) :0.5 (0.4)
Discharge Inch (mm) : 1″ (25)
Phase : 1
Start Method : Capacitor
Head : 8 m
Capacity : 0.07 m³/min
Capacity : 4.2 m³/h
Solid Passage : 1.5 mm
Weight 1 ø : 11 kg
SPECIFICATION PRODUCT
| DISCHARGE (mm) | 50 | |
| Limits of use | Liquid Temp | 0 ~ 40°C (32 ~ 104°F) |
| Submersion Depth | 10 m | |
| Type | Frequency | 50 Hz |
| Motor | 2 P (3000 RPM) | |
| Dry Motor | ||
| Insulation | Class B | |
| Protection/Protector | IP68/Auto-Cut | |
| Bearing | Ball Type | |
| M.seal | Double M. Seals | |
| Cable Base | Epoxy Resin Sealed | |
| Material | Upper Cover | ADC12 |
| Motor Frame | ADC12 | |
| Shaft End | SUS410 | |
| M. Seals | CA/CE and SiC/SiC | |
| Casing | Synthetic Rubber | |
| Impeller | Urethane Rubber + SPCC | |
| Cable | VCT or H07RN-F or SJOW | |
| Optional | pumps can be customized to fit specifications | |
