Submersible Roots Blower TSW65 TRUNDEAN is invented to use in passage trough, foam removing trough, blow trough and air puffing trough. Also is made to prevent second social effect of pollution, noiseless and extending machine life-span. Besides, the power of Submersible Roots Blower is from 2hp to 20hp, and can be applicable to pressure conveyance. Moreover, submersible roots blower are applied to underwater, so there will be not much noise when in use. Strong structure and lower energy consumption are also the advantages of Submersible Roots Blowers. Trundean Submersible Roots Blower are also available for special order with custom design.
Specification :
- Applications of the pressure conveyance
- Pressure applied : 0 ~ 0.6 kgf/ cm2 2~20 HP
- Special order with specific designs
Feature :
- Quietness : Because of its submersibility under water, so there will be not much noise from the machine when in use
- No need of a silencer : Because of its under water, the created noise will be very low, so there will be no need to do silencer. Under – water can mean space – saving.
- Strong structure, be relieved : The direct connect between the motor and the blower can avoid the inconvenience of traditionally
- Low energy consumption : designed to control backflow pressure to the rotor in order to reduce energy consumption
- Longer bearing life : Less vibration transmitted through the lobe results approximately 20% longer bearing life
Specification Submersible Roots Blower TSW65 :
- Type : TSW-65
- Bore : 2.5 inch
- Power : 5 HP
- Pressure kgf/ cm2 | Capacity m3/min
- 0.1 kgf/cm2 | 3.99 m3/min
- 0.2 kgf/cm2 | 3.85 m3/min
- 0.3 kgf/cm2 | 3.71 m3/min
- 0.4 kgf/cm2 | 0.56 m3/min
Supply for submersible pump, centrifugal pump, submersible sewage and drainage pump, fire fighting pump, booster pump, irrigation pump, mix volute pump, diaphragm metering pump for chemical, magnetic drive pump, feeder pump, gear pump, rotary pump, oil pump barrel hand pump, Oil pump, etc.
