Grinder Pump HCP 50GF22.2 submersible pump for drainage of waste water, transferring of waste water and sewage. Efficient for individual residence, apartment, public building.
FEATURES :
- Standard accessories include : epoxy resin cable base, dry motor, double mechanical seal, auto-cut protection, double ball bearing support shaft and rotor.
- Vortex impeller design prevents clogging by cutting up articles.
- Radial utter and cutter ring SUS440C : corrosion resistant material, hardened to 55-60 Rockwell C
- Specific single phase design for starting torque, and its torque is five times stronger than General capacitor pump. The impeller can prevent from clogging when grinding the objectives.
- 32GF21.5/22.2 DN 40 model horizontal casing (No. 90 derajad Elbow set available)
- HCP grinder pump single phase equipped with Centrifugal switch and capacitor motor design to provide extreme high torque starting, and offering 5 times higher torque than average capacitor starting motor.
APPLICATION
- Used un pressure sewage system
- Drainage of wasterwater from individual residence, apartment, buildings, recreational developments, motels.
- Transferring wastewater of commercial buildings, industrial plants, wastewater sampling, small hospitals.
- Schools, federal, state and local parks, wastewater drainage
- To transfer various wastewater and sewage.
SPECIFICATION PRODUCT :
| Model | GF | |
| Discharge (mm) | 32• 50 | |
| Limits of Use | Liquid Temp. | 0 ~ 40°C (32 ~ 104°F) |
| Applications | Residential wastewater | |
| Sewage | ||
| Submersion Depth | 32m (100 feet) | |
| Limits of Use | Frequency | 50 Hz |
| Motor | 2 P (3000 RPM) •Dry Motor | |
| Insulation | Class B (1.3~3HP) • Class F (5HP) | |
| Protection | IP68 | |
| Protector | Auto-Cut | |
| Bearing | Ball Type | |
| M.seal | Double M.Seal | |
| Impeller | Semi-open | |
| Material | Upper Cover | FC-200 |
| Motor Frame | FC-200 | |
| Shaft End | SUS403 | |
| M.seal | Upper : Carbon/CeramicLower : Silicon/silicon | |
| Radial Cutter | SUS440C | |
| Casing | FC-200 | |
| Impeller | FC-200 | |
| Cable | VCT or H07RN-F or SJOW/SOW | |
SPECIFICATION PERFORMANCE GRINDER PUMP HCP 50GF22.2
Model : 50GF23.7
HP (kW) : 5 (3.7)
Discharge Inch (mm) : 2″ (50)
Phase : 3
Start Method : Direct
Head : 26 m
Capacity : 0.2 m³/min
Capacity : 12 m³/h
Weight 3 ø : 53 kg
