Vane Pumps Nachi VDR13

Vane Pumps Nachi VDR13 variable volume vane pump 20 to 45 l/min 6 Mpa with new design, energy efficient, built in high precision. Available for single pump and double pump/ foot mounting type.

Features of Vane Pumps Nachi VDR13:

• Energy efficient, economical operation
• Built – in high – precision temperature compensation mechanism
• The ring is displaced by a spring, and a rise in pressure automatically moves it to the center to make the discharge rate zero.
• Relief valve and unloading valve can be eliminated from the circuit
• It was possible to reduce the size of the unit because there was no increase of proportional input to pressure which prevented increases in the temperature of the fluid.
• New design for lower noise and improved durability
• Handling
  • Rotation Direction
    The direction is always is clockwise (rightward) when viewed from the shaft side
  • Drain
    Drain piping must be direct piping up to a point that is below the tank fluid level, and back pressure due to pipe resistance

Specification of VDR-1A(B)-1A1-13:

• Capacity : 13.9 cm3/rev
• No-load Discharge Rate :
  • 1000min−1 : 14 l/min
  • 1200min−1 : 16.5 l/min
  • 1500min−1 : 21 l/min
  • 1800min−1 : 25 l/min
• Pressure adjustment range : 1 to 2 Mpa {10.2 to 20.6 kgf/cm2}
• Allowable peak pressure : 14 Mpa 143 kgf/cm2
• Revolution speed : 800 (min) ; 1800 (max)
• Weight : 8 kg

Specification of VDR-11A(B)-1A1-1A1-13 (Double Pump)

• Vent side
  • Discharge rate : 25 l/min
  • Pressure adjustment range : 1 to 2 Mpa {10.2 to 20.4 kgf/cm2}
• Shaft side :
  • Discharge rate : 25 l/min
  • Pressure adjustment range : 1 to 2 Mpa {10 to 20.4 kgf/cm2}
• Allowable peak pressure : 14 Mpa (143 kgf/ cm2)
• Revolution speed min-1 : 800 (min) ; 1800 (max)
• Weight : 14 kg