Booster Pump Grundfos UPA120

Booster Pump Grundfos UPA120 is a compact domestic high-efficiency in-line boosting pump designed for residential homes. UPA increases water pressure to required levels at showers, taps and other tapping points. This pump has an inlet and outlet port of 1 inch. The pressure rating of the pump corresponds with PN 10 and a port-to-port length of 180 mm.

Booster Pump Grundfos UPA120


Booster Pump Grundfos UPA120 Suitable for :


  • The design is robust and built upon corrosion-free materials and cataphoresis-coated cast iron pump housing to ensure a long lifetime.
  • The pump is a canned rotor pump type where pump and motor form an integral unit without shaft seal.
  • This pump must always be installed with horizontal motor shaft.
  • This booster has a 2-pole, asynchronous, squirrel-cage motor with thermal protection.
  • The bearings are lubricated by the pumped liquid.
  • These constructional features ensure maintenance-free operation.


  • Liquid:
    Pumped liquid: Water
    Liquid temperature range: 2 .. 95 °C
    Selected liquid temperature: 60 °C
    Density: 983.2 kg/m³
    Rated flow: 2.32 m³/h
    Rated head: 8.005 m
  • Installation:
    Range of ambient temperature: 0 .. 40 °C
    Maximum operating pressure: 10 bar
    Type of connection: G
    Size of connection: 1 inch
    Pressure rating for connection: PN 10
    Port-to-port length: 180 mm
  • Electrical data:
    Max. power input: 250 W
    Mains frequency: 50 Hz
    Rated voltage: 1 x 230 V
    Maximum current consumption: 1.14 A
    Capacitor size – run: 6 µF

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.