GRUNDFOS SUBMERSIBLE PUMP KP250A


GRUNDFOS SUBMERSIBLE PUMP KP250A designed for liquid transfer and drainage of clean or slightly dirty wastewater with the pump completely or partly submerged in the liquid.
The pump is suitable for these applications:

  • Drainage of flooded cellars or buildings
  • Pumping of domestic wastewater without toilet waste
  • Emptying of pools, tanks and vessels
  • Pumping within agriculture, the dairy industry,
    horticulture and the process industry
GRUNDFOS SUBMERSIBLE PUMP KP250A

The pumps are suitable for these liquids:

CONSTRUCTION

Single-stage, submersible, stainless steel, drainage pump in a robust design with upward-pointing
discharge port placed on top of the pump. The water enters the pump through the holes of the suction strainer, preventing the passage of large solids. The sturdy impeller has single-curved vanes with bevelled front edges preventing fibres from jamming the impeller. The guide vanes in the pump housing guide the liquid, lifting sand grains into the liquid flow, thus preventing blocking by sand.

MOTOR

The motor is a single- or three-phase asynchronous canned motor with liquid-filled rotor chamber and
water-lubricated bearings. The motor is cooled by the pumped liquid around the motor.

Enclosure class: IP68

Insulation class: F

TECHNICAL DATA GRUNDFOS SUBMERSIBLE PUMP KP250:

  • Pump type : KP 250A (Auto)
  • Voltase : 1 x 115 V
  • P2 : 1/3 HP
  • Cable length and plug : 25 feet with NEMA 5

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.