Ebara 2CDX Centrifugal Pumps Dual impeller centrifugal electric pumps with hydraulic parts in AISI 304 and AISI 316 stainless steel, Strong structure, Small dimensions.
The components of the 2CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability. The process uses a high-pressure fluid (up to 1200 bar) to form the metal. The hydraulic fluid, in our case water, with increasing pressure pushes the stainless steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
APPLICATION Ebara 2CDX Centrifugal Pumps
- Domestic pressure boosting
- Small-scale garden irrigation
- Washing
- Treating water
- Cooling towers
- Moving clean water in general
SPECIFICATION PUMP :
Liquid Handled
- Type of liquid : Clean water
- Temperature [°C] : minimal -5, maksimal +60, maximal +60(E), maximal +110 (H-HS-HW-HSW
Maximum working pressure [Mpa] : 0.8
Construction :
- Impeller : Closed centrifugal type (Twin)
- Shaft seal type : Mechanical Seal
- Bearing : Sealed ball bearing
Pipe Connection :
- Suction : from G 1″1/4 to G 1″1/2 (2 CDX200)
- Discharge : G 1″
Material :
- Casing : EN 1.4301 (AISI 304)
- Impeller : EN 1.4301 (AISI 304)
- Casing Cover : EN 1.4301 (AISI 304)
- Shaft seal : Ceramic/Carbon/NBR
- Shaft : EN 1.4301 (AISI 304)
- Bracket : Aluminium (up to 1.5 kW included), Cast Iron (2.2 kW and above)
SPECIFICATION OF MOTOR :
Type
- Electric – TEFC
- Single phase and three phase
No. of Poles : 2
Insulation Class : F
Power Rating :
– Single Phase : kW (0.75 ÷ 2.2), HP (1 ÷ 2)
– Three Phase : kW (0.75÷ 3.7), HP (1 ÷ 5)
Frequency : 50 Hz
Voltage :
– Single Phase : 230 V ± 10%
– Three Phase : 230 V/400 ± 10%
Casing Material : Aluminium
