GIN PUMP Q6-20 / 2-0.75 Multistage submersible pump.
Work Conditions :
The pump can work properly and continuously under following operational conditions :
- Medium is not corrosive. Sand contents should be max. 0.10% by volume and granular size should be max. 0.20mm
- Medium temperature shouldn’t be over 40° C and PH should be 6.5-8.5.
- The pump should be operated with rated head. The pump should be min. 0.5m over the water bottom and not be inserted into sludge.
- Power frequency should be 50Hz, single phase voltage 220V, three phase voltage 380V, and voltage fluctuation should be 0.9-1.1 times than the rated.
Application :
The motor pump adopted multistage impellers , and has advantage of high head, used in countryside and industry for elevating water from well, irrigation, sprinkling and tower water supply, and also used in draining off waters for building sites.
TECHNICAL DATA GIN PUMP QD6-20 :
- Model : QD6-20/2-0.75
- Flow : 6 m3/h
- Head : 20 m
- Power : 0.75 kW
- Voltage : 220 V
- Diameter of Necessary pipe : 1.25 inch / 1.5 inch
- Rotary velocity ” 2860 r/min
TECHNICAL DATA GIN PUMP Q6-20 :
- Model : Q6-20/2-0.75
- Flow : 6 m3/h
- Head : 20 m
- Power : 0.75 kW
- Voltage : 380 V
- Diameter of Necessary pipe : 1.25 inch / 1.5 inch
- Rotary velocity ” 2860 r/min