Submersible Dewatering Pump IC48


Submersible Dewatering Pump IC48 HCP submersible dewatering pump applied for :

  • Aquiculture water supply and drainage
  • Water supply for agricultural irrigation systems and underground water pumping
  • Landscape, water feature and horticulture irrigation
  • Extraction of water from rivers, lakes and reservoirs
Submersible Dewatering Pump IC48

FEATURES :

  • The internal die casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product.
  • Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal.
  • Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
  • An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications.
  • For above or below surface water applications, the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max.  8m deep of underground water and water circulation applications. (W-Well Type)
  • New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
  • The Chrome Steel impeller has adopted for IC~32B~610, with Hardness of HRC 25~30, better anti-corrosion, and extend the product lifetime.

PERFORMANCE SPECIFICATION Submersible Dewatering Pump IC48

  • Model : IC-48
  • HP : 7 1/2 (5.5) kW
  • Discharge Inch : 4 Inch 100 mm
  • Phase : 3
  • Start Method : Direct
  • Head : 19 m
  • Capacity : 1 m³/min
  • Capacity : 60 m³/h
  • Solid Passage : 10 mm
  • Weight 3 ø : 75 kg

SPECIFICATION PRODUCT :

Discharge (mm)80 • 100 • 150
Limit of UseLiquid Temp.0 ~ 40° (32 ~ 140° F)
ApplicationsAgriculture Irrigation
Aquiculture water  • River Water
Sumersion Depth30 m (100 feet)
TypeFrequency50 Hz
Motor1/2 ~ 1 HP2P (3000 RPM)  • Dry Motor
  
InsulationClass F (1 1/2 ~ 3 HP : Class B )
ProtectionIP68
ProtectorAuto-cut
BearingBall Type
M. SealDouble M. Seals
ImpellerEnclosed-Channel
MaterialOuter CoverSUS304
Upper CoverFC-200
Motor FrameSUS304 (1.5 HP)  • FC-200 (2~ 10 HP)
Shaft EndSUS304 (1.5 ~ 3 HP)  • SUS304 (5~ 10 HP)
M. SealUpper : Carbon/Ceramic
Lower : Silicon/Silicon
 
CasingFC-200
ImpellerChrome Steel (IC-32B~IC-610) • Bronze (IC-215)
CableVCT or H07RN-F or SJOW/SOW
Optionalpumps can be customized to fit specifications

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.