Submersible Pump HCP 80AFU23.7A

Submersible Pump HCP 80AFU23.7A submersible sewage pump for drainage of waste water, pumping sewage, and for sewage management.

Submersible Pump HCP 80AFU23.7A


  • International standard design : Epoxy Resin Sealed Cable, Auto Cut (MTS : Miniature Thermal Sensor Equip to >15HP model), dry motor, silicon carbide mechanical seal, high grade cast iron offering highest quality and performance.
  • P/U/C/E multiple impellers designed to handle sewage solids and/or fibrous substances
  • Double Mechanical Seal : Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.
  • Mechanical seal bracket designed with Oil Elevating Chip to enhance the lubricant, and extend the lifetime of the Mechanical Seal
  • Full range offering low to high head and flow capabilities, with compact and easy installation. Also, available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit.
  • AFC pump is designed with 6 lobes input, equipped with double tungsten blade; with can strongly cut off the foreign materials and avoid  the impeller clog.


  • Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant.
  • Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory. Sewage management, accumulated water, septic tank stock farm
  • Pumping sewage from hotels, restaurants schools and public buildings
  • Sewage management, accumulated water, septic tank, stock farm.


Discharge (mm) 50 • 80 • 100
Limits of UseLiquid Temp.0 ~ 40°C (32 ~ 104°F)
Submersion Depth30m (100 feet)
TypeFrequency50 Hz
Motor2 P (3000 RPM) • 4 P (1500 RPM) •Dry Motor
InsulationClass B (0.5~3HP) • Class F (5~10HP)
BearingBall Type
M. sealDouble M. Seal
ImpellerSemi-open (P/U)Enclosed-channel (E)
MaterialUpper CoverFC-200
Motor FrameFC-200
Shaft EndSUS410 (2P : 0.5~1HP)SUS403 (2P:2~10HP • 4P:0.5-5HP)SUS420J2 (4P:7.5 ~10 HP)
M. sealUpper : Carbon/ Ceramic Lower : Silicon/silicon
CableVCT or H07RN-F or SJOW/SOW


Model : 80AFU23.7A

HP (kW) : 5 (3.7)

Discharge Inch (mm) : 3″ (80)

Phase : 3

Start Method : Direct

Head : 16.5 m

Capacity : 0.5 m³/min

Capacity : 30 m³/h

Solid Passage : 50 mm

Weight 3 ø : 46  kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.