FIRE PUMP CET 20HP PFP-20HPHND-MR Pressure and Volume Pump. This pressure volume pump is the most suitable for drop in units. The engine and pump mounted on a steel protective frame with folding handles. This pump suitable applied for fire fighting
FEATURES :
- Oil Alert System (applicable types)
The Oil Alert System designed to prevent engine damage by an insufficient amount of oil in the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert indicator (red) comes on and the Oil Alert System will automatically stop the engine (the engine switch will remain in the ON position) - Hour Meter
After starting the engine, the elapsed time of the engine in use will be count. It will not count the elapsed time of the engine operation by just turning the engine switch ON - Fuel Cut Solenoid
The engine equipped with a fuel – cut solenoid that allows fuel to flow to the carburetor main jet when the engine switch is in the ON or START position and stops the flow of fuel to the main jet when the engine switch is in the OFF position
The engine must be connected to the battery to energize the fuel cut solenoid, allowing the engine to run. If the battery is disconnected, fuel flow to the carburetor will stop.
ENGINE SPECIFICATIONS :
- GX 630 Honda air cooled engine
- V – Twin cylinder, 4 – stroke gasoline engine
- Electric start
- 6 Gallon (22 l ) detachable fuel tank
- Charge coil 12V – 17A
PUMP UNIT SPECIFICATIONS FIRE PUMP CET 20HP:
- C.E.T single stage centrifugal pump
- Pum body made from high resistance aluminum alloy
- Bronze impeller
- Mechanical shaft seal
- Exhaust priming system, guaranteed up to 20′(6 meter) lift
- One 1 1/2” (38 mm) delivery outlet with 1/4-turn ball valve
- One 2 1/2” (65 mm) suction inlet
- Dimensions: Length: 21 1/4” (540 mm)
Width: 26 1/2” (673 mm); Height: 24” (610 mm) - Weight: 183 lbs (83 kg)
INCLUDED ACCESSORIES
- Low oil alert
- Pressure gauge
- 12-V battery
