Ebara Submersible Pump 50DL5.4 can be used for sewage, waster water, and storm water drainage.
Features :
- Unique impeller design prevents overload under severe operating conditions
- Semi-open non-clog impellers prevent pump clog by foreign matter
- The protective device built into the motor prevents the motor from damage as a result of over-current or abnormal temperature rise of the coil
- Optional Quick Discharge Connectors facilitates easy installation and maintenance
- Range of models up to 300 mm discharge size and 45kw available
- Submersible cable : 10 m
Specification of Ebara Submersible Pump 50DL5.4 :
- Liquid Handheld :
– Type of liquid : Sewage and waste water
– Temperature : 40 deg. C (manual and A Type) : 32 deg. C (J’ Type)
– Max. solid : up to 88mm solids/ 110mm fiber - Maximum submergence : 8m
- Minimum submergence : Refer to low water level (L.W.L) in dimension
- Synchronous Speed : 1450 rpm (4 poles)
- Construction :
– Mechanical seal : Oil lubricated, double mechanical seal
– Impeller : Non-clog, semi open
– Bearing : Pre lubricated. Sealed ball bearing - Material :
– Casing : cast iron
– Impeller : cast iron
– Shaft : 403 stainless steel
– Mechanical seal :
Impeller side : Silicon carbide
Motor side : Carbon/ ceramic
Lubricating oil : Turbine oil VG32 (SAE low/ 20W)
Motor :
- Type : Air filled watertight
- Insulation : Class F
- Protection : Built-in overload protection (up to 7.5 kW), Built in temperature detector protector (11 to 45 kW)
Accessories :
- Standard : Cable 10m. Discharge elbow
- Optional : Quick discharge connector (QDC)
Available Pump :
- 50DL5.4 : 0.4 kw
- 50DL5.75 : 0.75 kw
- 65DL51.5 : 1.5 kw
- 65DLD55.5 : 5.5 kw
- 65DLD57.5 : 7.5 kw
- 65DL511 : 11 kw
- 65DL515 : 15 kw
- 65DL518 : 18.5 kw
- 65DL522 : 22 kw
- 80DL51.5 : 1.5 kw
- 80DL52.2 : 2.2 kw
- 80DL53.7 : 3.7 kw
- 80DL55.5 : 5.5 kw
- 80DLC55.5 : 5.5 kw
- 80DLD57.5 : 7.5 kw
- 80DLC57.5 : 7.5 kw
