Centrifugal Pump Ebara GS32-125

Centrifugal Pump Ebara GS32-125 end Suction Volute Pump. This pump can be used for :

Building :

Air conditioning – District heating and cooling :

• General water supply
• Brine (antifreeze liquid)
• Hot water circulation
• High pressure booster

Water Supply :

• Water supply duties for municipalities
• Irrigation
• Drainage clean water
• Fire fighting pritection
• Swimming pool

General Industry

• Semiconductor Industry
  Pure Water
• Food Industry
  General water (Cooling water, recycling water, filtered water
  CIP (Cleaning In Place)
• Pulp and Paper Industry
  White water (bellow pulp conc. of 0.3%)
• Automotive Industry
  Water (Without slurry)
• Steel Industry-Non-ferrous metals Industry
  Coolant
  Cooling  Water
• Garbage Incineration
  Cooling water
  Deaerator
  Condensate water
• Other chemical
• Diesel Oil, Fuel Oil, Lubricants Oil

Specification product of Centrifugal Pump Ebara GS32-125:

• Model : GS
• Liquid Handled :
  – Type Of Liquid : Clean Water
  – Temperature : -10 deg. C to 140 deg. C
• Maximum operating Pressure : Up to 16 bar (16.3 kgf/cm2) for standard flange DIN-PN16
• Construction :
  – Impeller : Closed
  – Shaft Seal : Mechanical Seal and Gland Packing
  – Ball Bearing : Shield ball bearing (Grease Lubrication)
• Material :
  – Casing : Cast Iron
  – Impeller : Bronze
  – Shaft : Cr. Steel (SUS 431)
  – Case Wear Ring : Bronze
  – Shaft Sleeve : 304 Stainless steel for Gland packing only
  – O-ring : EPDM
• Flange Standard : EN1092-2 (DIN-PN 16)
• Priming Hole : Discharge size 32 until 80 mm not available

Features Ebara GS32-125 Centrifugal Pump:

• Energy – saving design
  – World top class pump efficiency achieved
  – Major improvement over our previous models by impeller designed using our proprietary 3D inverse design technology
  – Higher efficiency means lower energy consumption and motor output, and more compact size
• Simple maintenance
  – Back pull-out structure enables disassembly and inspection without removal of suction and discharge piping
  – Shield bearings eliminate need for adding or exchanging lubricating oil
  – Shaft seal flushing and quenching piping not required for the standard application
  – Simplified bearings and shaft seal enable easy assembly
• Pump specifications (Casing material : cast iron) :
  – Maximum operating pressure : up to 16bar (1.6 Mpa) for standard flange DIN-PN16; Up to 14 bar (1.4 Mpa) for standard flange JIS10K
  – Liquid temperature range expansion : -10 deg. C to 140 deg. C
  – Compatible with multiple flange standards
  – Able to meet customer specifications with many combinations of shaft seals and materials
• International standards