Pedrollo Pump CKRm 80E

Pedrollo Pump CKRm 80E Suitable for use with clean water or liquids that do not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.

As a specific result of the pump’s operating principle they are suitable for use in all situations where a compact self-priming pump is required or where the fluid supply is limited, irregular or contains air.

Performance Range :

• Flow rate up to 50 l/min (3 m³/h)
• Head up to 51 m

Application Limits :

• Manometric suction lift up to 9 m (HS)
• Liquid temperature between  -10°C and +40°C
• Temperature of diesel up to +55°C
• Ambient temperature between  +40°C
• Maximum working pressure 6 bar
• Continuous Service S1

FEATURES :

COMPONENT	CONSTRUCTION CHARACTERISTICS
PUMP BODY	Cast iron with stainless steel insert to prevent impeller due to the formation of rust. The pump body is complete with threaded ports in compliance with ISO 228/1
MOTOR BRACKET	Aluminium with brass insert (patended), reduces the risk of impeller seiure
IMPELLER	Brass, star type with open radial vanes
MOTOR SHAFT	Stainless steel EN 10088-3-1.4104
MECHANICAL SEAL	Seal	Shaft	Materials
	Model	Diameter	Stationary ring	Rotational ring	Elastomer
	AR-12V	ø 12mm	Ceramic	Graphite	Viton
BEARINGS	6203 ZZ / 6203 ZZ
CAPACITOR	Pump	Capacitance
	Single-phase	(230 V or 240 V)	(110 V)
	CKRm 80E	16μF 450 VL	60 μF 300 VL
	CKRm 90E	20μF 450 VL	60 μF 300 VL
ELECTRIC MOTOR	CKRm : Single-phase 230 V – 50 Hz with thermal overload protector incorporated into the winding
	CKR : three-phase 230/400 V- 50 Hz

Technical Specification of Pedrollo Pump CKRm 80E:

• Model : CKRm 90E
• Single phase / 230V 5.0 A
• Port : 1 Inch
• Weight : 11 kg
• Capacity :
  0.3 m3/h 5 l/min ; Head 46 m
  0.6 m3/h 10 l/min ; Head 42 m
  0.9 m3/h 15 l/min ; Head 38 m
  1.2 m3/h 20 l/min ; Head 34 m
  1.5 m3/h 25 l/min ; Head 20 m
  1.8 m3/h 30 l/min ; Head 26 m
  2.1 m3/h 35 l/min ; Head 22 m
  2.4 m3/h 40 l/min ; Head 18 m
  3.0 m3/h 50 l/min ; Head 10 m