Sewage Pump Padova A21AF for Drainage of construction site and subway, flood control/prevent of public construction, irrigation, water circulation of aquaculture and landscape pond, etc
FEATURES :
- Mini size, lightweight and superior to same grades of other pumps.
- Motor frame, shaft, screws and strainer made of stainless steel to provide long service life and attractive appearance
- Good performance, high water volume and energy saving, high wear resistant mechanical seal and oil seal for maintain long time operation
- Dependable laminated sheet of Si steel is adopted to motor; shaft and rotor are machining precisely to raise stability and efficiency of motor.
- Inner cable wires and cable case are upgraded by filling EPOXY to raise humidity-resistance.
- The product range is up to 15HP, dual SIC mechanical seal is built in ( 1 1/2 Hp and above), and stress eliminating design is adopted (10 hp and above) to raise operating efficiency
- Superior design to easily disassemble motor and pump housing for maintenance
SPECIFICATION :
- Discharge : 40 mm, 50 mm, 80 mm, 100 mm
- Limit Of Use
Liquid Temp : 0~40°C (32~104°F)
Applications : Wastewater sewage and drainage water
Submersion Depth : 30 m (100 feet) - Type
Frequency : 50Hz
Motor : 2P (3000 RPM) and Dry motor (A-05A : Oil motor)
Insulation : Class B
Protection : IP68
Protector : Auto-Cut (A-05A 3ø none, A-05A/B/L 1ø Overheat)
Bearing : Ball Type
M. Seal : Double M. seal (A-05A : Single M. seal)
Impeller : Semi-Open (A-43 : Enclosed-Channel) - Material
Upper Cover : FC-200
Motor Frame : SUS304
Shaft End : SUS410 (0.5~1.5HP) and SUS403 (2~3HP)
Impeller : FC-200 (A-05A/B : PA) - M. seal :
Upper : Carbon/ceramic
Lower : Silicon/Silicon
Casing : FC-200
Cable : VCT or H07RN-F or SOW (10HP/230V : SJOW)
Specification Of Sewage Pump Padova A21AF
Model | A-21AF |
Output Hp (Kw) | 1 (0.75) |
Discharge (Inch) | 2″ |
Phase | 1 ∅ |
Head (m) | 9 |
Cpacity (m³/min) | 0.2 |
Length (mm) | 250 |
Width (mm) | 180 |
Height (mm) | 460 |
Weight (mm) | 19 |