Pompa Nocchi Priox 460/13 constructed in 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior. Designed with refracted impeller and vortex operation. Automatic version (aut) equipped with float switch.
Application :
- All application for lifting and draining waste water with suspended solid bodies
- Lifting stations with one or more pumps for agricultural and civil complexes
Application Data :
- Type of liquid : waste and sewage water with solid bodies
- Maximum liquid temperature : 40 degree Celcius
- Maximum immersin below water level : 7 m
- Minimum drainage level 60 mm (on manual version)
- Free transit of solid bodies : 40 mm; 50mm (PRIOX 600/13 – PRIOX 800/18)
Motor :
- Dry Motor
- Protection rating IP 68
- Insulation class F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incoporated in the motor winding
- Fully insulated cable connection chamber
- Self-lubricating ball bearings
- Rotation speed 2850 rpm
USAGE DATA
- Type of liquid: discharge water with solids
- Maximum temperature of the liquid 40°C
- Maximum immersion under the water level 7 m
- Continuous operation (S1) only with submersed pump
- Minimum drying level 60 mm (in manual version)
- Free passage of solids: up to 40 mm or 50 mm as indicated in the table
Specifications Pompa Nocchi Priox 460/13 :
Model : PRIOX 460/13 M AUT
Motor Output : 1.5 HP, 1.1 kW
Motor Power : 2.2 HP, 1.6 kW
Voltage : 1-230 V