Tacmina PZD 100R Metering Pump Solenoid Driven Metering Pump with digital setting. Provided with easy calibration function for accurate pump calibration. Just push the button to automatically discharge 300 strokes worth of chemical and enter the actual discharge volume that you will be measuring. This is all you need to do for accurate calibration
Function Common to All Models
- Enter injection amounts directly and select from patterns of injection amount settings
– Set by stroke speed
– Set by discharge amount
– Set by percent - Free Power Supply
100 to 240 VAC (+/-10%) operations means you do not need to worry about voltage fluctuations at the site. Can be used at a variety of locations and for a variety of purposes. - Can be used with high viscosity liquids
for polymer coagulant injections - An array of wetted part materials to handle a wide variety of chemicals and uses
– VTCE/ VTCF (Polyvinyl chloride / PVC)
– STCT (Stainless Steel SS304)
– FTCT (PVDF)
– VTCF (PVC) - Easy-to-Read display panel and simple operation keys
- Head swivels in three directions to fit the mounting location
- Separated head and controller convenient for device integration
- Water resistant, dustproof construction
Functions Common To All Models :
Simple correction to actual discharge amount
Simple correction function to automatically discharge 300 strokes of chemicals. Just enter the discharge amount into this device to use the actual flow amount for an easy and accurate correction
Specification of Metering Pump Tacmina PZD-100R-VTCE
- Maximum discharge volume : 100 mL/ min 6.0 l/h
- Maximum discharge pressure : 0.7 Mpa
- Stroke speed : 1 to 300 strokes/ min (dial setting)
- Stroke length : Fixed at 1.0 mm
- Connection (hose/ tube) :
Discharge/ suction side : 6 x 11 (PVC braided hose), 6 x 8 (PE), 1/4 x 3/8 (PE)
Relief valve/ air release : 4 x 6 (soft PVC hose) - Maximum allowable viscosity : 50 mPa’s
- Allowable temperature : Ambient temperature 0 to 40 deg. C/ Transferring liquid : 0 to 40 deg.C (no freezing allowed)
- Environmental protection : IEC standard : IP65 or equivalent (water and dust proof)
- Operation mode (manual) : Digital settings : 3 patterns [stroke speed (1 to 300 strokes/ min, in 1 stroke / min increments), discharge volume (in 0.1 mL/ min increments), percentage (1 to 100%, in 1% increments)]
- Power supply :
Rated voltage : AC 100 to 240 V ( +/-10%)
No. of phases/ frequency : 1 phase/ 50 or 60 Hz
Maximum current : 2.5 A
Power consumption : Maximum 250 VA/ AVe : 18 W - Weight : 1.8 kg
