DIAPHRAGM PUMP YAMADA NDP15


DIAPHRAGM PUMP YAMADA NDP15 1/2″ Fluid Port AOOD Pump provide a maximum flow rate of 13.5 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar (PVDF), groundable acetal, and polypropylene construction, with a wide variety of diaphragm materials.

ADVANTAGES :

  • Rugged, Bolted Construction
    All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
  • Outside-Accessible Air Valve
    Inspection or maintenance of every Yamada air valve may be performed without removing the pump from service. Outside accessible, making it easy to fix / inspect.
  • Unified Air Valve Concept
    Common-size air valve assemblies reduce parts confusion and inventory.
  • Pilot Valve
    Unique to the diaphragm pump Yamada design is an individual modular pilot valve that actuates the air valve. It is depressed slightly by the inner center disk creating a pressure drop at one end of the air valve, allowing shifting to occur. It is maintenance free with no cumbersome snap rings or lubricated dynamic o-rings to replace or repair.
DIAPHRAGM PUMP YAMADA NDP15

GENERAL PUMP INFORMATION :

  • 13.5 gallons/ minute
    1/2″ NPT fluid port
  • Intake and Discharge Connections
    • Polypropylene (PPG) : 1/2″ Female NPT
    • Kynar (PVDF) : 1/2″ Female NPT
    • Groundable Acetal : 1/2″ Female NPT
    • Aluminum (ADC-12) : 1/2″ Female NPT
    • Stainless Steel (316) : 1/2″ Female NPT
    • Air Inlet : 1/4″ Female NPT (includes ball valve)
    • Air Exhaust : /8″ Female NPT Identified as EXH II (includes internal silencer)
  • Diaphragm Maximum Liquid Temperature
    • Buna N 180°F (82°C)
    • Neoprene 180°F (82°C)
    • Santoprene(TPO) 180°F (82°C)
    • EPDM 212°F (100°C)
    • PTFE 212°F (100°C)
    • Hytrel (TPE) 248°F (120°C)
    • Viton fluoroelastomer 248°F (120°C)
    • Ultimate 212°F (100°C)
  • Air Supply Pressure (All Models) : 20 to 100 PSI (1.4 to 7 kgf/cm²)
  • Discharge Volume Per Cycle : 0.034 gallons (128 cc)
  • Maximum Cycles Per Minute : 400
  • Maximum Size Solid : 1/32″ (1mm)
  • Maximum Dry Suction Lift : Flat-type check valve: 8-feet ; Ball-type check valve: 5-feet
  • Air Motor : Ryton air motor standard
  • Other Options : Split manifold pumps

DIAPHRAGM PUMP YAMADA NDP15 MODELS :

Model #Description
851950NDP-15BAC
851952NDP-15BAH
851951NDP-15BAN
852685NDP-15BAS
851949NDP-15BAT
851949-UNDP-15BAU
*NSNDP-15BAV
851962NDP-15BSC
851964NDP-15BSH
851963NDP-15BSN
852686NDP-15BSS
851961NDP-15BST
851961-UNDP-15BSU
852348NDP-15BPC
852350NDP-15BPH
852814NDP-15BPN
852687NDP-15BPS
852349NDP-15BPT
852349-UNDP-15BPU
851904NDP-15FPC
851906NDP-15FPH
851944NDP-15FPN
852688NDP-15FPS
851699NDP-15FPT
851699-UNDP-15FPU
852104NDP-15FVH
852771NDP-15FVS
852103NDP-15FVT
852103-UNDP-15FVU

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.