DIAPHRAGM PUMP NDP40 YAMADA 1-1/2 Inch Port AODD pumps provide a maximum flow rate of 107 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar (PVDF), groundable acetal, and polypropylene construction.
ADVANTAGES :
- Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly. - Outside-Accessible Air Valve
Inspection or maintenance of every Yamada air valve may be performed without removing the pump from service. Outside accessible, making it easy to fix / inspect. - Unified Air Valve Concept
Common-size air valve assemblies reduce parts confusion and inventory. - Pilot Valve
Unique to the diaphragm pump Yamada design is an individual modular pilot valve that actuates the air valve. It is depressed slightly by the inner center disk creating a pressure drop at one end of the air valve, allowing shifting to occur. It is maintenance free with no cumbersome snap rings or lubricated dynamic o-rings to replace or repair.
SPECIFICATIONS :
- Handles a wide variety of fluids with high solids content
- Self Priming
- Ability to Run Dry
- Variable flow rate and discharge pressure
- Portable
- Simple Installation
- Dead Head
- Shear Sensitive
- Safe Operation
- Submersible
- Pumping efficiency remains constant
- Cannot Overheat
- High Pressure capabilities
- No mechanical seals, couplings or motors
- No pressure relief or bypass needed
GENERAL PUMP INFORMATION DIAPHRAGM PUMP NDP40 YAMADA
- 107 Gallons/Minute
1-1/2″ Fluid Port (NPT or ANSI Flange) - Intake and Discharge Connections
- Polypropylene (PPG) : 1-1/2″ ANSI Flange B16.5 #150
- Kynar (PVDF) : 1-1/2″ ANSI Flange B16.5 #150
- Aluminum (ADC-12) : 1-1/2″ ANSI Flange B16.5 #150 (with tapped 1-1/2″ Female NPT)
- Stainless Steel (316) : 1-1/2″ ANSI Flange B16.5 #150 or 1-1/2″ Female NPT
- Cast Iron : 1-1/2″ Female NPT
- Air Inlet : 1/2″ Female NPT (includes ball valve)
- Air Exhaust : 1″ Female NPT (includes silencer)
- Air Supply Pressure (All Models) : 20 to 100 PSI (1.4 to 7 kgf/cm²)
- Discharge Volume Per Cycle :
- Rubber diaphragm: 0.73 gallons (2.74 liters)
- PTFE diaphragm: 0.37 gallons (1.40 liters)
- Maximum Cycles Per Minute :
- Rubber diaphragm: 148
- PTFE diaphragm: 270
- Maximum Size Solid : 9/32″ (7 mm)
- Maximum Dry Suction Lift : Rubber-fitted pump capability: 18-feet
- Air Motor : Standard: Aluminum
- Optional Coating : PTFE-coated
