Pump Calpeda MXSM 303CG 5″ Stainless Steel multi-stage submersible clean water pumps. MXSM complete with built in thermal protector, 15 m cable, control box with capacitor, with float switch.
Construction :
- 5” Close coupled multi-stage submersible pumps.
- All parts in contact with the fluid both internal and external are in chrome-nickle
stainless steel. - Hydraulics located below the motor with the motor cooled by the pumped fluid.
- Safe operation is possible with the motor only partially submerged.
- Double shaft seal with oil chamber.
- The suction strainer prevents the entrance of solids with diameter bigger than
2 mm.
Application :
- For water supply from wells, tanks or reservoirs.
- For domestic, civil and industrial applications, for garden use, irrigation
- rain water harvesting systems.
Operating Conditions :
- Liquid temperature up to 35° C.
- Minimum internal diameter of well: 140 mm.
- Minimum immersion depth: 100 mm.
- Maximum immersion depth: 20 m (with suitable cable length).
- Continuous duty.
Motor :
- 2-pole induction motor, 50 Hz (n ≈ 2900 rpm
- single-phase 230 V ± 10%, with thermal protector
- Incorporated capacitor
- Float switch MXSM.. CG up to 10A (on demand)
- Cable: H07RN8-F, length 15 m, with plug CEI-UNEL 47166.
- Insulation class F.
- Protection IP X8 (for continuous immersion).
- Triple impregnation humidity-proof dry winding
- Constructed in accordance with EN 60335-2-41
Specification Pump Calpeda MXSM 303CG:
- Model : MXSM 303CG
- Capacity : 3 m3/h
- Head : 22 Meter
- Output : 1.25 inch
- Motor : 0.45 kW 0.6 HP
- 1 phase
Supply for submersible pump, centrifugal pump, submersible sewage and drainage pump, fire fighting pump, booster pump, irrigation pump, mix volute pump, diaphragm metering pump for chemical, magnetic drive pump, feeder pump, gear pump, rotary pump, oil pump barrel hand pump, Oil pump, etc.
