Submersible Pump Calpeda GM10 Submersible drainage pump constructed with composite polymers developed especially for this product. These new rustproof materials are resistant to corrosion, indeformable at maximum temperature differentials in the pump and motor and resistant to internal and external strain. Shaft of chrome steel AISI 430. Three lip seals in NBR. Minimum dimension and high levels of performance, for use in many different applications, for flow rates up to 200 liters/ min. With float switch for automatic start/stop.
Applications :
- For clean or slightly dirty water.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing water or pits for collection of rain water. For irrigation purposes.
- For use outdoor, the power supply cable shall have a length not less than 10 m
Operating Condition :
- Maximum liquid temperature for prolonged use: 35 °C (with
- immersed motor).
- Immersion depth: 5 m max (with suitable cable length).
- Not suitable for continuous duty for prolonged time.
Motor :
- 2-pole induction motor, 50 Hz (n = 2900 rpm).
- Single-phase 230 V ± 10%, with thermal protector.
- Capacitor inserted in the housing incorporated in the plug.
- Cable: with plug, length 5 m, 245IEC57 4 G 0,75 mm2, according to EN 60335-2-41
- for pumps up to 5 kg.
- Insulation class B.
- Protection IP 68.
- Triple impregnation humidity-proof dry winding.
Specification Of Submersible Pump Calpeda GM10 :
- Model : GM 10
- Capacity : 9m3/h
- Head : 3.7 Meter
- Output : 1.5 inch
- Motor : 0.3 kW 0.4 Hp
- 3 phase
Supply for submersible pump, centrifugal pump, submersible sewage and drainage pump, fire fighting pump, booster pump, irrigation pump, mix volute pump, diaphragm metering pump for chemical, magnetic drive pump, feeder pump, gear pump, rotary pump, oil pump barrel hand pump, Oil pump, etc.
