GIN PUMP 4SPM2-6 Submersible deep well pump For water supply from wells or reservoirs, For domestic use, for civil and industrial applications, For garden use and irrigation.
Operating Conditions
- Maximum fluid temperature up to +50° C
- Maximum sand content : 0.25%
- Maximum immersion : 80m
- Minimum well diameter : 4″
Motor and Pump
- Rewindable motor or Full obturated screen motor
- Three phase : 380V – 415V/50Hz
Direct Start (1 cable)
Star-delta start (2 cables) - Equip with start control box or digital auto-control box
- NEMA dimension standards
- Curve tolerance according to ISO 2548
MATERIAL :
| Components | Material |
| Delivery casing | ①AISI 304 SS ② AISI 316 SS |
| Check valve | ①AISI 304 SS ② AISI 316 SS |
| Suction lantern | C①AISI 304 SS ② AISI 316 SS |
| Stage Casing | ①AISI 304 SS ② AISI 316 SS |
| Impeller | ①AISI 304 SS ② AISI 316 SS |
| Shaft | ①AISI 316 SS ②AISI 304 SS |
| Shaft Coupling | ①AISI 316 SS ②AISI 304 SS |
| Wear Ring | Rubber |
| Motor external casing | AISI 304 SS |
| Top shock | ①Cast-Cu ASTM280 ② Cast-iron G20 UNI5007 |
| Bottom support | AISI 304 SS |
| Mechanical Seal | Special seal for deep well |
| Shaft | AISI 304 SS-C1045 |
| Bearing | NSK |
| Seal lubricant oil | oil for food machinery and pharmaceutic use |
TECHNICAL SPECIFICATION GIN PUMP 4SPM2-6
| Model | Power (P2) | Capacity |
| 4SPM2-6 | 0.37 kW 0.5 HP | 0 m3/h 0 l/min ; Head : 36 m 0.3 m3/h 5 l/min ; Head : 35 m 0.6 m3/h 10 l/min ; Head : 33 m 0.9 m3/h 15 l/min ; Head : 32 m 1.2 m3/h 20 l/min ; Head : 31 m 1.5 m3/h 25 l/min ; Head : 28 m 1.8 m3/h 30 l/min ; Head : 25 m 2.1 m3/h 35 l/min ; Head : 21 m 2.4 m3/h 40 l/min ; Head : 16 m 2.7 m3/h 45 l/min ; Head : 9 m |
