GIN PUMP 6SP30-5 Submersible deep well pump For water supply from wells or reservoirs, For domestic use, for civil and industrial applications, For garden use and irrigation.
Operating Conditions
- Maximum fluid temperature up to +50° C
- Maximum sand content : 0.25%
- Maximum immersion : 100m
- Minimum well diameter : 6″
Motor and Pump
- Rewindable motor or Full obturated screen motor
- Three phase : 380V – 415V/50Hz
Direct Start (1 cable)
Star-delta start (2 cables) - Equip with start control box or digital auto-control box
- NEMA dimension standards
- Curve tolerance according to ISO 2548
MATERIAL
| Components | Material |
| Delivery casing | ①AISI 304 SS ②AISI 316 SS |
| Check Valve | ①AISI 304 SS ②AISI 316 SS |
| Suction lantern | ①AISI 304 SS ②AISI 316 SS |
| Stage Casing | ①AISI 304 SS ②AISI 316 SS |
| Shaft | ①AISI 316 SS ②AISI 304 SS |
| Shaft Coupling | ①AISI 316 SS ②AISI 304 SS |
| Wear Ring | Rubber |
| Motor external casing | AISI 304 SS |
| Top shock | ①Cast-iron G20 UNI5007 ②AISI 304 SS |
| Bottom support | ①Cast-iron G20 UNI5007 ②AISI 304 SS |
| Seal | ①NBR ②Carbon-SIC/TC |
| Shaft | AISI 304 SS-C1045 |
| Thrust Bearing | ①Ceramic/carbon ②NSK |
| Radial Bearing | ①Ceramic/TC ②NSK |
TECHNICAL SPECIFICATION GIN PUMP 6SP30-5
| Model | Power (P2) | Capacity |
| 6SP30-5 | 5.5 kW 7.5 HP | 0 m3/h 0 l/min ; Head : 55 m 50 m3/h 3 l/min ; Head : 54 m 100 m3/h 6 l/min ; Head : 53 m 150 m3/h 9 l/min ; Head : 52 m 200 m3/h 12 l/min ; Head : 51 m 250 m3/h 15 l/min ; Head : 49 m 300 m3/h 18 l/min ; Head : 48 m 350 m3/h 21 l/min ; Head : 46 m 400 m3/h 24 l/min ; Head : 43 m 450 m3/h 27 l/min ; Head : 41 m 250 m3/h 30 l/min ; Head : 38 m 300 m3/h 33 l/min ; Head : 34 m 350 m3/h 36 l/min ; Head : 29 m 400 m3/h 39 l/min ; Head : 25 m 450 m3/h 42 l/min ; Head : 20 m |
