GIN PUMP 6SR18/6 Submersible deep well pump For water supply from wells or reservoirs, For domestic use, for civil and industrial applications, For garden use and irrigation.
Operating Conditions
- Maximum fluid temperature up to +35° C
- Maximum sand content : 0.25%
- Maximum immersion : 100m
- Minimum well diameter : 6″
Motor and Pump
- Rewindable motor or Full obturated screen motor
- Three phase : 380V – 415V/50Hz
Direct Start (1 cable)
Star-delta start (2 cables) - Equip with start control box or digital auto-control box
- NEMA dimension standards
- Curve tolerance according to ISO 2548
TECHNICAL SPECIFICATION GIN PUMP 6SR18/6
| Model | Power (P2) | Capacity |
| 6SR18/6 | 5.5 kW 7.5 HP | 0 m3/h 0 l/min ; Head : 86 m 50 m3/h 3 l/min ; Head : 83 m 100 m3/h 6 l/min ; Head : 80 m 150 m3/h 9 l/min ; Head : 76 m 200 m3/h 12 l/min ; Head : 71 m 250 m3/h 15 l/min ; Head : 63 m 300 m3/h 18 l/min ; Head : 54 m 350 m3/h 21 l/min ; Head : 44 m 400 m3/h 24 l/min ; Head : 32 m 450 m3/h 27 l/min ; Head : 18 m |
MATERIAL :
| Components | Material |
| Pump external casing | AISI 304 SS |
| Delivery casing | Cast-Iron G20 UNI5007 |
| Suction lantern | Cast-Iron G20 UNI5007 |
| Diffusier | Plastic.PC/AISI 304 SS |
| Impeller | ①Plastic. POM②Plastic. PPO |
| Shaft | ①AISI 316 SS ②AISI 304 SS |
| Shaft Coupling | ①AISI 316 SS ②AISI 304 SS |
| Wear Ring | AISI 304 SS |
| Motor external casing | AISI 304 SS |
| Top shock | ①Cast-iron G20 UNI5007 ②AISI 304 SS |
| Bottom support | ①Cast-iron G20 UNI5007 ②AISI 304 SS |
| Seal | ①NBR ②Carbon-SIC/TC |
| Shaft | AISI 304 SS-C1045 |
| Thrust Bearing | ①Ceramic/carbon ②NSK |
| Radial Bearing | ①Ceramic/TC ②NSK |
