Dewatering Pump HCP IC-43B submersible dewatering pump applied for :
- Aquiculture water supply and drainage
- Water supply for agricultural irrigation systems and underground water pumping
- Landscape, water feature and horticulture irrigation
- Extraction of water from rivers, lakes and reservoirs
FEATURES :
- The internal die casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product.
- Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal.
- Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
- An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications.
- For above or below surface water applications, the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W-Well Type)
- New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
- The Chrome Steel impeller has adopted for IC~32B~610, with Hardness of HRC 25~30, better anti-corrosion, and extend the product lifetime.
PERFORMANCE SPECIFICATION Dewatering Pump HCP IC-43B
- Model : IC-43B
- HP : 3 (2.2) kW
- Discharge Inch : 3 1/2 inch 90 mm and 4 Inch 100 mm
- Phase : 1 and 3
- Start Method : Capacitor and Direct
- Head : 9.5 m
- Capacity : 0.8 m³/min
- Capacity : 48 m³/h
- Solid Passage : 10 mm
- Weight 3 ø : 39 kg
SPECIFICATION PRODUCT :
| Discharge (mm) | 80 • 100 • 150 | ||
| Limit of Use | Liquid Temp. | 0 ~ 40° (32 ~ 140° F) | |
| Applications | Agriculture Irrigation | ||
| Aquiculture water • River Water | |||
| Sumersion Depth | 30 m (100 feet) | ||
| Type | Frequency | 50 Hz | |
| Motor | 1/2 ~ 1 HP | 2P (3000 RPM) • Dry Motor | |
| Insulation | Class F (1 1/2 ~ 3 HP : Class B ) | ||
| Protection | IP68 | ||
| Protector | Auto-cut | ||
| Bearing | Ball Type | ||
| M. Seal | Double M. Seals | ||
| Impeller | Enclosed-Channel | ||
| Material | Outer Cover | SUS304 | |
| Upper Cover | FC-200 | ||
| Motor Frame | SUS304 (1.5 HP) • FC-200 (2~ 10 HP) | ||
| Shaft End | SUS304 (1.5 ~ 3 HP) • SUS304 (5~ 10 HP) | ||
| M. Seal | Upper : Carbon/Ceramic | ||
| Lower : Silicon/Silicon | |||
| Casing | FC-200 | ||
| Impeller | Chrome Steel (IC-32B~IC-610) • Bronze (IC-215) | ||
| Cable | VCT or H07RN-F or SJOW/SOW | ||
| Optional | pumps can be customized to fit specifications | ||
