Fluorin Pump CNP SZ25 Plastic centrifugal pump has one impeller, axial suction and radical discharge.
FEATURES :
- Simple structure, shaft directly connected with impeller
- Easy for pipe works, inlet and outlet connected by standard flanges
- Wet parts made of F26, F46, accessories are made of cast iron (HT200)
Typical Application :
- Any concentration of acid alkali, salty solution, strong oxidants, organic solvent etc. Strongly corrosive medium
- Petrol, chemical, pesticide, acid cleaning, dying, paper making, galvanization, etc.
Operation Conditions :
- Thin medium not containing grain or fiber
- Medium temperature : -20 deg. C ~ 120 deg. C
- Medium density : Max. 1,35 x 10³ kg/ m³
- Ambient temperature : Max. +40 deg. C
- Altitude : Max. 1000m
- Pressure : Max. 10 bar
TECHNICAL SPECIFICATION Fluorin Pump CNP SZ25
| Model | Nominal flow | Nominal head | Flow Range | Max. bar | Power | Max efficiency |
| SZ25-25-125 | 3.2 m3/h | 20 m | 2.2 – 3.8 m3/h | 2.1 bar | 1.1 kW | 28 % |
| SZ40-25-125 | 6.3 m3/h | 20 m | 4.4 – 7.6 m3/h | 2.1 bar | 1.5 kW | 41 % |
| SZ50-32-125 | 12.5 m3/h | 20 m | 8.8 – 15 m3/h | 2.3 bar | 3 kW | 44 % |
| SZ50-32-160 | 12.5 m3/h | 32 m | 8.8 – 15 m3/h | 3.3 bar | 4 kW | 51 % |
| SZ65-50-125 | 25 m3/h | 20 m | 17.5 – 30 m3/h | 2 bar | 4 kW | 55 % |
| SZ65-50-160 | 25 m3/h | 32 m | 17.5 – 30 m3/h | 3.3 bar | 5.5 kW | 60 % |
| SZ65-40-200 | 25 m3/h | 50 m | 17.5 – 30 m3/h | 5.1 bar | 11 kW | 55 % |
| SZ80-65-125 | 50 m3/h | 20 m | 35 – 60 m3/h | 2.6 bar | 7.5 kW | 62 % |
| SZ80-65-160 | 50 m3/h | 32 m | 35 – 60 m3/h | 3.6 bar | 11 kW | 62 % |
| SZ80-50-200 | 50 m3/h | 50 m | 35 – 60 m3/h | 5.4 bar | 18.5 kW | 63 % |
