Mitsubishi Pump CSP 755S Cast Iron Vortex Sewage Submersible Pump for waste water, sewage water, liquid carrying and solid matters.
FEATURES :
- All part made from cast iron with double layer coating provide ultimate durability
- Built in automatic thermal protector to protect motor from burning even when impeller is being locked
DESCRIPTION :
- Single Phase model 220~230V, 50Hz
- Three Phase model 380-415V 50Hz
- All cast iron with double layer coating structure for ultimate durability
- Vortex non-clogged impeller design able to handle fluid contaminated with solid diameter up to 35mm.
- Built-in thermal protector to prevent motor burning from impeller lock
- Double side mechcanical seal placed in oil bath for 24-hr operation ability also included with oilseal to protect seal face from sand or dust for sewage
SPECIFICATION PRODUCT :
- Pumping fluid :
Type of fluid : waste water , sewage water, liquid carrying, solid matters
pH 5-9
Temperature : 0 ~ 40 deg. C - Pump
Impeller : Semi Open and vortex type
Shaft seal : Double mechanical seal with oil chamber
Lubricant : Turbine Oil - Pump Material :
Casing : Cast Iron
Impeller : Thermoplastic Elastomer
M. Seal : SiC + SiC + Ceramic / Carbon - Motor :
Type : Dry type Submersible Induction Motor (IP 68) 2P Insulation Class F
Supply : 1 phase (220 V) and 3 phase (380 V)
Starting Method : Capacitor Run (Single phase), Direct on Line (Three Phase)
Protector : Miniature Thermal Protector (Single phase), Circle thermal protector ( three phase)
Bearing : Double shielded ball type
TECHNICAL SPECIFICATION Mitsubishi Pump CSP 755S
| Model | CSP-755S |
|---|---|
| Max. Head | 12.3m |
| Max. Flow Rate | 550 l/min |
| Discharge | 80 mm/ 3″ |
| Weight | 30 kg |
| Power | 0.75kw |
| Phase | Single Phase |
| Voltage | 220v |
| Frequency | 50 Hz |
| Motor Output | 1 hp |
| Normal Rate Head (m) | 6.8 |
