Dewatering Pump Padova 80AGN22.2 used for :
- Drainage of Construction site
- Drainage of subway/ tunnel
- Wastewater treatment of iron works
- Mobile use for drainage of public facilities
- Removal of sludge at harbor/ river
- Any other wastewater treatment of industries.
FEATURES :
- Dry – type model with over load protector is built-in to protector motor from overhead and overload
- Inner cable wires and cable base
- Motor frame and casing made of stainless steel and water cooling jacket design increases efficiency of heat diffusion
- Stainless steel shaft, Dual mechanical seal SIC/SIC
- Impeller and agitator made of high chrome alloy steel (HR, 2HP above), High wear resistance, and calibrated by dynamic balance test.
- Pump housing and stress eliminating plate are made of wear resistant and malleable cast iron, and stress eliminating design is adopted between pump housing and mechanical seal lid to reduce flow stress.
SPECIFICATION :
Discharge : 80 mm, 100 mm, 150 mm
Limit Of Use
Liquid Temp : 0~40°C (32~104°F)
Applications : Dewatering fluid containing solid sediment
Submersion Depth : 30 m (100 feet)
Type
Frequency : 50Hz
Motor : 2P (3000 RPM) and Dry motor
Insulation : Class B (2~3HP ) and Class F (5~10HP)
Protection : IP68
Protector : Auto-Cut
Bearing : Ball Type
M. Seal : Double M. seal
Impeller : Semi-Open (H) and Enclosed-Channel (N/L)
Material
Outer Cover : SUS304
Upper Cover : FC-200
Motor Frame : FC-200 (2~10HP)
Shaft End : SUS403 (2~3HP) and SUS304 (5~10HP)
Impeller : HiCrFC
Wear Ring/Plate : HiCrFC
M.seal :
* Upper : Carbon/ceramic
* Lower : Silicon/Silicon
Casing : FC-200
Agitator : FCD-700
Cable : VCT or H07RN-F or SOW (10HP/230V : SJOW)
Specification of Dewatering Pump Padova 80AGN22.2 :
| Model | 80AGN22.2 |
| Output | 3 Hp (2.2 kW) |
| Discharge | 3″ |
| Phase | 1∅ / 3 ∅ |
| Pole | 2 |
| Standards Head | 8 m |
| Standard Capacity | 0.5 m³/h |
| Free Passage | 10 mm |
| Maximum diameter | 230 mm |
| Height | 680/695 mm |
| Weight | 55 kg |
