Submersible Pump Padova 80AGN23.7

Submersible Pump Padova 80AGN23.7 used for :

• Drainage of Construction site
• Drainage of subway/ tunnel
• Wastewater treatment of iron works
• Mobile use for drainage of public facilities
• Removal of sludge at harbor/ river
• Any other wastewater treatment of industries.

FEATURES :

1. Dry – type model with over load protector is built-in to protector motor from overhead and overload
2. Inner cable wires and cable base
3. Motor frame and casing made of stainless steel and water cooling jacket design increases efficiency of heat diffusion
4. Stainless steel shaft, Dual mechanical seal SIC/SIC
5. Impeller and agitator made of high chrome alloy steel (HR, 2HP above), High wear resistance, and calibrated by dynamic balance test.
6. Pump housing and stress eliminating plate are made of wear resistant and malleable cast iron, and stress eliminating design is adopted between pump housing and mechanical seal lid to reduce flow stress.

SPECIFICATION :

Discharge : 80 mm, 100 mm, 150 mm

Limit Of Use

Liquid Temp : 0~40°C (32~104°F)

Applications : Dewatering fluid containing solid sediment

Submersion Depth : 30 m (100 feet)

Type

Frequency : 50Hz

Motor : 2P (3000 RPM) and Dry motor

Insulation : Class B (2~3HP ) and Class F (5~10HP)

Protection : IP68

Protector : Auto-Cut

Bearing : Ball Type

M. Seal : Double M. seal

Impeller : Semi-Open (H) and Enclosed-Channel (N/L)

Material

Outer Cover : SUS304

Upper Cover : FC-200

Motor Frame : FC-200 (2~10HP)

Shaft End : SUS403 (2~3HP) and SUS304 (5~10HP)

Impeller : HiCrFC

Wear Ring/Plate : HiCrFC

M.seal :

* Upper : Carbon/ceramic

* Lower : Silicon/Silicon

Casing : FC-200

Agitator : FCD-700

Cable : VCT or H07RN-F or SOW (10HP/230V : SJOW)

Specification of Submersible Pump Padova 80AGN23.7 :

Model	80AGN23.7
Output	5 Hp (3.7 kW)
Discharge	3″/4″
Phase	3 ∅
Pole	2
Standards Head	7 m
Standard Capacity	1.0 m³/h
Free Passage	10 mm
Maximum diameter	230 mm
Height	720 mm
Weight	60 kg