Submersible Pump Padova 150AGL27.5

Submersible Pump Padova 150AGL27.5 used for :

Submersible Pump Padova 150AGL27.5


  1. Dry – type model with over load protector is built-in to protector motor from overhead and overload
  2. Inner cable wires and cable base
  3. Motor frame and casing made of stainless steel and water cooling jacket design increases efficiency of heat diffusion
  4. Stainless steel shaft, Dual mechanical seal SIC/SIC
  5. Impeller and agitator made of high chrome alloy steel (HR, 2HP above), High wear resistance, and calibrated by dynamic balance test.
  6. Pump housing and stress eliminating plate are made of wear resistant and malleable cast iron, and stress eliminating design is adopted between pump housing and mechanical seal lid to reduce flow stress.


Discharge : 80 mm, 100 mm, 150 mm

Limit Of Use

Liquid Temp : 0~40°C (32~104°F)

Applications : Dewatering fluid containing solid sediment

Submersion Depth : 30 m (100 feet)


Frequency : 50Hz

Motor : 2P (3000 RPM) and Dry motor

Insulation : Class B (2~3HP ) and Class F (5~10HP)

Protection : IP68

Protector : Auto-Cut

Bearing : Ball Type

M. Seal : Double M. seal

Impeller : Semi-Open (H) and Enclosed-Channel (N/L)


Outer Cover : SUS304

Upper Cover : FC-200

Motor Frame : FC-200 (2~10HP)

Shaft End : SUS403 (2~3HP) and SUS304 (5~10HP)

Impeller : HiCrFC

Wear Ring/Plate : HiCrFC

M.seal :

* Upper : Carbon/ceramic

* Lower : Silicon/Silicon

Casing : FC-200

Agitator : FCD-700

Cable : VCT or H07RN-F or SOW (10HP/230V : SJOW)

Specification of Submersible Pump Padova 150AGL27.5

Output10 Hp (7.5 kW)
Phase3 ∅
Standards Head10 m
Standard Capacity2.0 m³/h
Free Passage25 mm
Maximum diameter380 mm
Height840 mm
Weight115 kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.