Tsurumi Submersible Pump 100AB2.4S single phase submersible propeller pump Axial flow, cast iron propeller provides high efficiency, high volume pumping at low head. For the low head applications, the use of AB pump is more advantageous in power saving than the use of centrifugal pumps.
Application :
Tsurumi Submersible Propeller Pump can be used for :
- Water circulation for oxygen replenishing and water supply and drainage in fish ponds
- Irrigation o rice fields
- Drainage or large water volumes with improvement work for irrigation ditches etc.
- Transport to bypass waterways
- Water supply and drainage for pools, ponds, etc.
Features :
- Anti wicking Block
Gaps between lead cores are sealed to prevent ingress of water into the motor caused by water travelling along lead cores by capillary action - Dual Inside Mechanical Shaft Seal
Isolation of mechanical seals in an oil chamber provides a clean, non-corrosive and abrasion free lubricating environment to prevent spring failure due to corrosion or abrasion and bottom seal failure due to loss of cooling during dry-run conditions.
Specification of Tsurumi Submersible Pump 100AB2.4S :
- Discharge Bore : 100 mm 4 Inch
- Model : 100AB2.4S
- Motor Output : 0.4 kW 1/2 hp
- Phase : Single
- Starting Method : Capacitor Start
- Revolution 50Hz/ 60Hz : 3000/ 3600
- Maximum Head : 3 m
- Maximum Capacity : 0.8 m³/min
- Dry Weight : 18 kg
- Cable Length : 5 m
