Gear Pump Kundea KT5 Internal type gear pump.
FEATURES :
High suction and the max. Viscosity up to 45000 cps for liquid conveying. Extra temperature insulation units are optional. The shaft bearing is completely separated from liquid conveying systems. Mechanical seal, oil seal or tefflon cotton yarn units are available for customers.
APPLICATION :
Gear Pump Kundea KT5 Use For pumping various kinds of syrup, sauce, jam, milk, beverages, lubricants, heavy oil, asphalt, acetone, glue, benzene, plastic resin, synthetic resin, DOP, coating, ceramic paint, paint, etc.
SPECIFICATION GEAR PUMP KUNDEA KT5 :
Model : KT-5
- Bore : 2 Inch
- Rev. Speed : 480 rpm
- Pressure 2kg/cm2
Water capacity : 180 l/min
Power : 3 Hp - Pressure 5kg/cm2
Water capacity : 160 l/min
Power : 7.5 Hp
We also supply for another type and specification, see below for the specification :
Model : KT-3
- Bore : 1 Inch
- Rev. Speed : 510 rpm
- Pressure 2kg/cm2
Water capacity : 50 l/min
Power : 1 Hp - Pressure 5kg/cm2
Water capacity : 44 l/min
Power : 2 Hp
Model : KT-4
- Bore : 1.5 Inch
- Rev. Speed : 500 rpm
- Pressure 2kg/cm2
Water capacity : 115 l/min
Power : 2 Hp - Pressure 5kg/cm2
Water capacity : 100 l/min
Power : 5 Hp
Also supply for 1 Stage Water Sealed Vacuum Pump. See below for specification :
- Model : KB-1 (Single stage)
- DISP. Capacity : 280 DI/min
- Vacuum : 60 torr
- Power : 1 HP
- Rev. Speed : 3500 RPM
- Pipe Diameter : 1 Inch
- Water Discharge : 4 l/min
- Dimension (W x H x L) : 226 mm x 290 mm x 630 mm
- Weight : 40 kg (w/motor)
