Pump Calpeda A65 150CC close coupled self priming centrifugal pump with open impeller. The built-in backflow preventer avoids reverse siphoning when the pump is stopped and assures automatic re-priming at the next start.
The pump re-primes itself even if partially filled with liquid and with completely empty suction pipe.
This pump version with pump casing and lantern bracket in cast iron.
Applications of Pump Calpeda A65 150CC:
- Clean or slightly dirty water, also with solids up to 10 mm grain size for A 40, A 50 and 15 mm for A 65, A 80
- draining a basin or a sump
- irrigation
- For civil and industrial applications
Operating Conditions :
- Liquid temperature from -10 deg. C to +90 deg. C
- Room temperature up to 40 deg. C
- Maximum permissible working pressure up to 6 bar (10 bar for A 80-70)
- Continuous duty
Motor :
- 2 pole induction motor, 50 Hz (n = 2900 rpm)
- Three phase
230/ 400 V +/- 10% up to 3 kW
400/ 690 V +/- 10% from 4 to 7,5 kW - Insulation class F
- Protection IP 54
Materials :
| Pump casing Suction flange Inspection cover Lantern bracket Impeller | Cast iron |
| Shaft | Chrome nickel steel |
| Mechanical seal | Carbon – Ceramic – NBR |
Special Features on Request :
- other voltages
- Frequency 60 Hz
- Protection IP 55
- Special mechanical seal
- Higher or lower liquid or ambient temperatures
- Construction with bearing bracket
Performance specification :
| Model | A 65-150C/C |
| Voltages | 230 V 11,5 A 400 V 6,6 A |
| Rated motor power output (P2) | 2.2 kW 3 HP |
| Capacity | 15 m³/h 250 l/min ; Head 17,5 m 18 m³/h 300 l/min ; Head 17 m 24 m³/h 400 l/min ; Head 16 m 30 m³/h 500 l/min ; Head 14 m 33 m³/h 550 l/min ; Head 13 m 36 m³/h 600 l/min ; Head 11,5 m 42 m³/h 700 l/min ; Head 9 m 48 m³/h 800 l/min ; Head 6,5 m |
| Input | 2.5 Inch |
| Output | 2.5 Inch |
