Pulsatron LE33 Pulsafeeder Electronic Metering Pump are solenoid powered diaphragm metering pumps. The key element which differentiates these pumps from other types is the TFE lined elastomer diaphragm.
Pulsatron LE33 Pulsafeeder chemical pump is sealed against the reagent head forming a seals – less, leak free pumping chamber. The solenoid driver is connected to the diaphragm to create the pumping motion. As the diaphragm moves away from the face of the reagent head, it creates a vacuum which closes the discharge check valve and opens the suction check valve, drawing the pumped fluid into the pumping chamber. As the solenoid forces the diaphragm towards the face of the reagent head, the suction check valve closes and the discharge check valve opens allowing the liquid to flow out the discharge valve.
Key Features :
- Manual control
By on – line adjustable stroke rate and stroke length - Agency approved for demanding outdoor and indoor applications
- Highly reliable timing circuit
- Water resistant excellent for outdoor and indoor applications
- Internally dampened to reduce noise, very acceptable for household installations
- Guided ball check valve system, to reduce back flow and enhance outstanding priming characteristics
- Premium standard wetted component materials
- Few moving parts and wall mountable
- Safe and easy priming with durable leak-free bleed valve assembly (standard)
Features and Benefits :
- Reliable metering performance
- Rated “hot” for continuous duty
- High viscosity capability
- Leak – free, seal – less, liquid end
Materials :
Model | Series E |
Pump Head | GFPPL PVC SAN PVDF 316 SS |
Diaphragm | PTFE – faced Hypalon – backed |
Check Valves | – Seats/ O – rings : PTFE, Hypalon. Viton – Balls : Ceramic, PTFE, 316SS, Alloy C |
Fittings | GFPPL PVC PVDF |
Bleed Valve | Same as fitting and check valve selected, except 316SS |
Injection Valve Assembly Foot Valve Assembly | Same as fitting and check valve selected |
Tubing | Clear PVC White PE |
System Compatibility :
- A wide variety of chemicals can be pumped
- Immediate installation and start – up
- Safe and easy priming and valve maintenance
- Quick and economical liquid end maintenance
Pressure and Flow Rate Capacity of Pulsatron LE33 Pulsafeeder Metering Pump :
Model | LE33 |
Capacity nominal (max. ) | 0.50 gph (12 gpd) / 1.9 lph |
Maximum pressure | 250 PSIG 17 bar |
Connection | Tubing : – 1/4″ ID x 3/8″ OD – 3/8″ ID x 1/2″ OD – 3/16″ ID x 5/15″ OD Piping : 1/4″ FNPT |
Reproducibility | +/- 3% at maximum capacity |
Viscosity max CPS | For viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded ball checks. |
Stroke frequency | 125 strokes per minutes (SPM) maximum |
Stroke Frequency Turn | 10 : 1 |
Stroke Length Turn | 10 : 1 |
Power input | 230 VAC/ 50-60 HZ/ 1 ph |
Average Current Draw | 1.0 Amps @115 VAC, 0.5 Amps @ 230 VAC |
Peak Input Power | 300 Watts |
Average Input Power | 130 watts |