Pulsatron LEH8 Pulsafeeder


Pulsatron LEH8 Pulsafeeder 25.00 gph 600 gpd 94.6 lph 30 PSIG 2 bar Pulsafeeder electronic metering pump features manual control by on-line adjustable stroke rate and stroke length. It has been agency approved for demanding outdoor and indoor applications.

Key Features :

  • Manual control
    By on – line adjustable stroke rate and stroke length
  • Agency approved for demanding outdoor and indoor applications
  • Highly reliable timing circuit
  • Water resistant excellent for outdoor and indoor applications
  • Internally dampened to reduce noise, very acceptable for household installations
  • Guided ball check valve system, to reduce back flow and enhance outstanding priming characteristics
  • Premium standard wetted component materials
  • Few moving parts and wall mountable
  • Safe and easy priming with durable leak-free bleed valve assembly (standard)

Features and Benefits Electronic metering pump Pulsatron LEH8 Pulsafeeder :

  • Reliable metering performance
  • Rated “hot” for continuous duty
  • High viscosity capability
  • Leak – free, seal – less, liquid end
Pulsatron LEH8 Pulsafeeder

System Compatibility :

  • A wide variety of chemicals can be pumped
  • Immediate installation and start – up
  • Safe and easy priming and valve maintenance
  • Quick and economical liquid end maintenance
Pressure and Flow Rate Capacity :
ModelLEH8
Capacity nominal (max. )25.00 gph 600 gpd 94.6 lph
Maximum pressure30 PSIG 2 bar
ConnectionTubing :
– 3/8″ ID x 1/2″ OD
– 1/2″ ID x 3/4″ OD (LPH8 ONLY)
Piping :
– 1/4″ FNPT
– 1/2″ FNPT
Reproducibility+/- 3% at maximum capacity
Viscosity max CPSFor viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded ball checks.
Stroke frequency125 strokes per minutes (SPM) maximum
Stroke Frequency Turn10 : 1
Stroke Length Turn10 : 1
Power input230 VAC/ 50-60 HZ/ 1 ph
Average Current Draw1.0 Amps @115 VAC, 0.5 Amps @ 230 VAC
Peak Input Power300 Watts
Average Input Power130 watts
Materials :
ModelSeries E
Pump HeadGFPPL
PVC
SAN
PVDF
316 SS
DiaphragmPTFE – faced
Hypalon – backed
Check Valves– Seats/ O – rings : PTFE, Hypalon. Viton
– Balls : Ceramic, PTFE, 316SS, Alloy C
FittingsGFPPL
PVC
PVDF
Bleed ValveSame as fitting and check valve selected, except 316SS
Injection Valve Assembly
Foot Valve Assembly
Same as fitting and check valve selected
TubingClear PVC
White PE

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.