Metering Pump Tacmina PZ100R


Metering Pump Tacmina PZ100R is a solenoid driven metering pump with manual setting adjustment from 15 to 300 pulses per minute. Solenoid-Driven Metering Pump is a pump that uses an electromagnet as the driving power.

Features of Metering Pump Tacmina PZ100R :

  • Wide voltage range power supply
    Can be used with AC100 to 240 V (-/+ 10%) power supplies.
  • Adjusting dial for easy operation
    Manual adjustment from 15 to 300 pulses per minute
  • Water and dust proof specifications
    IEC standard : IP65 or equivalent
    Avoid condensation and immersion in water
  • Simple, safe, air release
Metering Pump Tacmina PZ100R
Specification of Metering Pump Tacmina PZ-100R-VTCE
  • Maximum discharge volume : 100 mL/ min 6.0 l/h
  • Maximum discharge pressure : 0.4 Mpa
  • Stroke speed : 15 to 300 strokes/ min (dial setting)
  • Stroke length : Fixed at 1.0 mm
  • Connection (hose/ tube) :
    Discharge/ suction side : 6 x 11 (PVC braided hose), 6 x 8 (PE), 1/4 x 3/8 (PE)
    Relief valve/ air release : 4 x 6 (soft PVC hose)
  • Maximum allowable viscosity : 50 mPa’s
  • Allowable temperature : Ambient temperature 0 to 40 deg. C/ Transferring liquid : 0 to 40 deg.C (no freezing allowed)
  • Environmental protection : IEC standard : IP65 or equivalent (water and dust proof)
  • Operation mode (manual) : setting stroke speed (15 to 300 strokes/ min) w/ manual dial
  • Power supply :
    Rated voltage : AC 100 to 240 V ( +/-10%)
    No. of phases/ frequency : 1 phase/ 50 or 60 Hz
    Maximum current : 2.2 A
    Power consumption : Maximum 220 VA/ AVe : 16 W
  • Weight : 1.7 kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.